Printer Settings
Phaser® 7760 Color Laser Printer
4-2
Printer Settings
This section includes:
■ Printer Control Settings on page 4-2
■ Paper Handling Settings on page 4-9
Printer Control Settings
This section includes:
■ Setting the Control Panel Language on page 4-2
■ Setting Control Panel Accessibility Behavior on page 4-3
■ Setting the Printer Date and Time on page 4-4
■ Controlling Startup Page Printing on page 4-5
■ Changing the Power Saver Timeout on page 4-6
■ Changing Intelligent Ready Mode on page 4-7
■ Setting the Timing for Supply Life Messages on page 4-8
Setting the Control Panel Language
To select the default control panel language, use one of the following options:
■ The printer’s control panel
■ CentreWare IS
Using the Control Panel
To select the default language on the control panel:
1. Select
Printer Setup, and then press the OK button.
2. Select
Control Panel Setup, and then press the OK button.
3. Select
Language, and then press the OK button.
4. Select the desired language, and then press the OK button.
Using CentreWare IS
To change the default control panel language using CentreWare IS:
1. Launch your web browser.
2. Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).
3. Click Properties.
4. Select the General folder on the left sidebar, and then select Printer Defaults.
5. In the User Preferences area, select the language from the Set Control Panel Language
drop-down list.
6. Click the Save Changes button at the bottom of the screen.
To Next Page
Loading...
Need help?
General