Discovery Protocols
System Administrator Guide
2-5
Discovery Protocols
This section includes:
■ DDNS/WINS on page 2-5
■ DNS (Domain Name Services) on page 2-6
■ Service Location Protocol on page 2-6
■ UPnP (Universal Plug and Play) on page 2-7
DDNS/WINS
DDNS/WINS settings can be obtained from the BOOTP or DHCP server, if enabled. These
settings enable the printer to register its IP name and address so other devices on the network
can refer to it by name.
To change the DDNS/WINS settings:
1. Launch your web browser.
2. Enter your printer’s IP address in the browser’s Address field.
3. Click the Properties tab.
4. Click the Protocols folder on the left navigation panel.
5. Select TCP/IP.
6. If prompted, enter your Admin or Key User name and password.
7. Under DDNS/WINS Settings select one of the following:
■ On: You can enter a DDNS/WINS Name and DDNS Domain Name.
■ Off: The values may be set by BOOTP/DHCP.
8. If you selected On, follow the instructions on the page. For more information, including a
description of the fields, click the Help button in CentreWare IS to view the online help.
9. Click the Save Changes button.
To Next Page
Loading...
Need help?
General
