Protocol Control
System Administrator Guide
3-13
EtherTalk
To change EtherTalk settings:
1. Launch your web browser.
2. Enter the printer’s IP address in the browser’s Address field.
3. Click Properties.
4. Select the Protocols folder on the left navigation panel.
5. Select EtherTalk.
6. If prompted, enter your Admin or Key User name and password.
7. Select On or Off in the EtherTalk box.
8. If you selected On, follow the instructions on the page to select EtherTalk options. For
more information, including a description of the fields, click the Help button in
CentreWare IS to view the online help.
9. Click the Save Changes button.
To Next Page
Loading...
