Xerox Phaser 8860 System Administrator Guide

Configuring the Print Host Access List
System Administrator Guide
4-9
Configuring the Print Host Access List
To prevent unauthorized printing to your printer:
1. Launch your web browser.
2. Enter your printer’s IP address in the browser’s Address field.
3. Click Properties.
4. Select the Security folder on the left navigation panel.
5. Select Printing Security Settings.
6. If prompted, enter your Admin or Key User name and password.
7. Enter the IP addresses or host names of the computers allowed printing access in the Host
Access List field. Separate entries with a blank or a comma, specify ranges with a
hyphen (-), and use an asterisk (*) to represent a group of numbers (e.g., 13.62.156.*). The
default setting is Unrestricted, which allows all users to access the printer to print their
jobs.
8. Click the Save Changes button.
See also:
About Access Control Lists on page 4-4

Xerox Phaser 8860 Specifications

General

Brand	Xerox
Model	Phaser 8860
Category	All in One Printer
Language	English