Getting Started
38 Xerox
®
VersaLink
®
C405 Color Multifunction Printer
User Guide
To install the Wireless Network Adapter:
1. Power off the printer.
2. To remove the Wireless Network Adapter Port Cover, press the latch to the left, then pull the cover
away from the printer.
3. Remove the packaging from the Wireless Network Adapter.
4. To install the Wireless Network Adapter, follow the procedure defined on the instruction sheet
provided with the Wireless Network Adapter.
CAUTION: Pulling on the adapter can cause damage. After the adapter is installed, remove it
only as needed, and as directed in the Wireless Network Adapter removal instructions. For details,
refer to Removing the Wireless Network Adapter.
To Next Page
Loading...
