b. Close the right side door.
CClleeaanniinngg tthhee CCoolloorr TToonneerr DDeennssiittyy SSeennssoorr
If the print or color density is too light, missing, or the background is foggy, clean the density sensor.
To clean the color toner density sensor:
1. Power off the printer.
2. Push down on the rear door release and pull open the door.
3. Remove the waste cartridge:
178
Xerox
®
VersaLink
®
C405 Color Multifunction Printer
User Guide
Maintenance
To Next Page
Loading...
