4. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
5. Load paper into the tray with the print-side face up.
• Load hole-punched paper with the holes to the left.
• Load label-sheets in the tray face up.
• For 1-sided printing, load letterhead paper face up with the top of the paper toward the back
of the tray.
• For 2-sided printing, load letterhead and pre-printed paper face down with the top edge
feeding into the printer.
Note: Do not load paper above the maximum fill line. Overfilling the tray can cause the
printer to jam.
6. Adjust the length and width guides to fit the paper.
Xerox
®
VersaLink
®
C600 Color Printer
User Guide
109
Paper and Media
To Next Page
Loading...
Need help?
General