SSeettttiinngg tthhee TTrraayy MMooddee
Tray Mode determines if you are prompted to confirm or modify paper settings when you load paper
in the tray. Tray Mode defines how the printer behaves when a paper conflict or mismatch occurs.
To configure the Bypass Tray Mode:
1. At the printer control panel, press the Home button.
2. Touch Device→Paper Trays.
3. Touch the Bypass Tray icon. It is displayed in the top position, before the numbered trays.
4. Touch Tray Mode.
5. Touch the desired mode:
• Bypass prompts you to confirm or modify paper tray settings when paper is loaded in the
Bypass Tray. The Bypass Tray Mode sets the Bypass Tray as the default tray for all print jobs
without a specified tray.
• Fully Adjustable prompts you to confirm or modify paper tray settings when paper is loaded
in the Bypass Tray.
6. To save the setting, touch OK.
7. To return to the Home screen, press the Home button.
CCoonnffiigguurriinngg tthhee TTrraayy MMooddee ffoorr TTrraayyss 11––55
1. At the printer control panel, press the Home button.
2. Touch Device→Paper Trays.
3. Touch the desired tray.
4. Touch Tray Mode.
5. Touch the desired mode:
• Fully Adjustable prompts you to confirm or modify paper tray settings when paper is loaded
in a tray.
• Dedicated uses the current paper size and type settings and does not prompt you to confirm
or modify the settings. Select this setting to use a tray for printing on a specific paper type
and size, such as letter-size or hole-punched paper.
6. To save the setting, touch OK.
7. To return to the Home screen, press the Home button.
Xerox
®
VersaLink
®
C600 Color Printer
User Guide
113
Paper and Media
To Next Page
Loading...
Need help?
General