a. If the paper type, size and color are correct, touch OK.
b. If the paper type, size or color are incorrect, change the settings.
• To select a paper type, touch the current paper type, then from the list, select Envelope.
• To select a size, touch the current size setting, then from the list, select the size.
• To select an envelope color, touch the current paper color, then from the list, select the
color.
c. To save the settings, touch OK.
LLooaaddiinngg EEnnvveellooppeess iinn TTrraayy 11
1. To remove the tray from the printer, pull out the tray until it stops. Lift the front of the tray
slightly, then pull it out.
2. Remove any paper in the tray.
3. Adjust the paper length and width guides as illustrated.
4. Load envelopes in the trays with the flaps closed, flap-side down, and the short edge leading into
the printer.
Note: Do not load more than 50 envelopes into the tray, up to 45 mm (1.8 in.) in height.
5. Adjust the width guides until they touch the edges of the envelopes.
6. Slide the tray all the way into the printer.
Xerox
®
VersaLink
®
C600 Color Printer
User Guide
119
Paper and Media
To Next Page
Loading...
Need help?
General