I N S T A L L A T I O N V E R S A L I N K ® C 7 0 0 0 S E R I E S
Customer Expectation and Installation Guide 21
Installation Planning
Main Components
The C7020/C7025/C7030 is delivered with Print Engine, Scanner and
Embedded Network Controller
Module dimensions
7. Device Direct (DD) Communications:
Each device will need to be communicating to Xerox through the internet via the Xerox Device Direct method for Remote Diagnostics
support. Follow the steps below (customer) to find how to setup Device Direct, if required.
Setting up Device Direct:
A) Go to the “Support and Drivers” link on Xerox.com.
Search for your product, then click on the Support link for that product.
In the search field, enter "Enroll SMart eSolutions" and follow the instructions provided.
B) If the search does not return any instructions:
Click on the Documentation link for your product.
Open the System Administrators Guide and refer to the section of the guide which provides information regarding Smart
eSolutions Setup and follow the steps provided.
SFP Dimensions and Weight (Unpackaged)
Base Unit with Single Tray with Stand
Module
Base Unit with Three Tray Module
Base Unit with Three Tray Module and
Integrated Office Finisher
MFP Dimensions and Weight (Unpackaged)
Base Unit with Single Tray with Stand
Module
Base Unit with High Capacity Tandem
Tray Module
Base Unit with Three Tray Module
Base Unit with Three Tray Module and
Office Finisher LX (with Booklet Maker)