Xerox VersaLink C7130 - Clearing Staple Jams in the Office Finisher

5. Remove the jammed staples, then push the clamp in the direction shown until the clamp clicks
into the locked position.
WARNING: The points of the jammed staples are sharp. Remove the jammed staples
carefully.
6. Grasp the staple cartridge handle, then insert the cartridge into the stapler until the cartridge
clicks into position.
7. Close the finisher front door.
SSttaappllee JJaammss iinn tthhee OOffffiiccee FFiinniisshheerr
Clearing Staple Jams in the Office Finisher
Caution: Do not perform this procedure while the printer is printing.
232