EasyManuals Logo

Xerox WorkCentre 5222 Supplementary Guide

Xerox WorkCentre 5222
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
1.7. Confirm the Machine ROM version and Clock
Before initial settings the System Administrator (Machine Administrator) has to
check the machine ROM version and the internal clock.
1.7.1. How to check by Control Panel
1. Press the <Machine Status> button on the control panel.
2.
Press the [General Information] on the touch screen.
3. Press the [Software Version] on the Machine information screen.
You can identify the software versions of the components of machine on the screen.
1.7.2. How to check by Print Report
1. Press the <Machine Status> button on the control panel.
2. Press the [Print Reports] on the Machine information screen.
3. Press the [Printer Reports] on the touch screen.
4. Press the [Configuration Reports] on the touch screen.
5. Press the <Start> button on the control panel.
You can identify the software versions of the components of machine by Print Report.
1.7.3. How to check the Clock
1. Press the <Log In / Out> button on the Control Panel.
2. Press the "11111" key on the numeric keypad. This is the factory default "ID”.
3. Press [Enter] on the touch screen.
4. Press the <Machine Status> button on the Control Panel.
5. Press the [Tools] tab.
6. Press the [System Settings].
7. Press [Common Service Settings].
8. Press [Machine Clock/Timers].
You can Check the time and date of internal clock. If it is required to change, refer to
following procedures.
9. Select the required option.
10. Select [Change Settings].
11. Change the required setting. Use the scroll bars to switch between screens.
12.
Select [Save].

Table of Contents

Other manuals for Xerox WorkCentre 5222

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre 5222 and is the answer not in the manual?

Xerox WorkCentre 5222 Specifications

General IconGeneral
AC input voltage100 - 127 V
AC input frequency50 - 60 Hz
Power consumption (sleep)3 W
Power consumption (standby)95 W
Power consumption (average operating)605 W
Depth (imperial)25.7 \
Finishing optionYes
Width (imperial)25.2 \
Height (imperial)43.1 \
Scan file formatsTIFF, PDF, XPS
Minimum storage drive space40 GB
Maximum media size (WxH) (imperial)11.7 x 17 \
Minimum media size (WxH) (imperial)5.5 x 8.3 \
Processor frequency333 MHz
Card reader integratedNo
Sound power level (standby)22 dB
Paper input typePaper tray
Total input capacity1100 sheets
Total output capacity500 sheets
Maximum input capacity5100 sheets
Total number of input trays2
Maximum number of input trays4
Auto document feeder (ADF) input capacity75 sheets
Print technologyLaser
Duplex printing modeAuto
Print speed (ISO/IEC 24734) mono54.8 ipm
Time to first page (black, normal)4.3 s
Print speed (black, normal quality, A3)13 ppm
Print speed (black, normal quality, A4/US Letter)22 ppm
Copier resize25 - 400 %
Maximum copy resolution600 x 600 DPI
Maximum number of copies999 copies
N-in-1 copy function (N=)2, 4, 8
Optical scanning resolution- DPI
PCL fonts81
Printer fontsPCL, PostScript
Printing colorsBlack
Stapling capacity50 sheets
Maximum duty cycle70000 pages per month
Recommended duty cycle0 - 12000 pages per month
Number of PostScript fonts136
Page description languagesPCL 5e, PCL 6
Cabling technology10/100Base-T(X)
Security algorithmsHTTPS, SNMP
Ethernet LAN data rates10, 100 Mbit/s
Supported network protocols (IPv6)EtherTalk, FTP, HTTP, HTTPs, LPR, SNMPv1, SNMPv2, SNMPv3, TCP/IP
Paper tray media typesBond paper, Heavy paper, Plain paper, Pre-Printed, Recycled paper
Paper tray media weight60 - 105 g/m²
ISO A-series sizes (A0...A9)A3, A4, A5, A6
ISO B-series sizes (B0...B9)B4, B5
Multi-purpose tray media typesBond paper, Envelopes, Hole punched paper, Labels, Letterhead, Plain paper, Recycled paper, Transparencies
Maximum ISO A-series paper sizeA3
Multi-Purpose Tray media weight60 - 215 g/m²
Paper tray media weight (imperial)16 - 28 lbs
Auto Document Feeder (ADF) media weight38 - 128 g/m²
Multi-Purpose Tray media weight (imperial)16 - 80 lbs
Auto Document Feeder (ADF) media weight (imperial)16 - 32 lbs
DisplayLCD
Product colorWhite
Market positioningBusiness
Standard interfacesEthernet, USB 2.0
Optional connectivityWireless LAN
USB 2.0 ports quantity1
Mac operating systems supportedMac OS X 10.3 Panther, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard
Linux operating systems supportedSuSE Linux 10, SuSE Linux 10.2, SuSE Linux 10.3
Other operating systems supportedSolaris 10, Solaris 8, Solaris 9
Server operating systems supportedWindows Server 2003, Windows Server 2008
Windows operating systems supportedWindows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
CertificationFCC, 89/336/EEC, UL, CB, 73/23/EEC, GOST, NOM, ISO 15408
Operating temperature (T-T)10 - 28 °C
Operating relative humidity (H-H)15 - 85 %
Weight and Dimensions IconWeight and Dimensions
Depth654 mm
Width640 mm
Height1114 mm

Related product manuals