Xerox WorkCentre 5632 System Administrator Guide

Windows 2000 Professional
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
146
7. Enter the IP Address of the printer.
8. Enter a name for the print queue and click [OK].
9. You will be prompted for a Print Driver. Select [Have Disk] and browse to the location of your Print
Driver.
10. Select the [.INF] file then click on [Open].
11. The wizard will return you to the previous dialog. Verify the path and file name are correct and
click on [OK].
12. Select the model that corresponds to your device and click on [Next].
13. The Name your Printer screen appears. Enter a printer name. Select [Yes] if you wish to make this
the default printer, then click on [Next].
14. The Printer Sharing screen appears. If you will be sharing this printer with other clients select the
[Share As] button and enter a share name. Click on [Next].
15. Enter a location and comment (optional).
16. Select [Yes] to print a test page and verify that it prints at the device. Click [Next].
17. Click on [Finish].
Configure the Print Driver
1. From the [Start] menu, select [Settings] and then [Printers].
2. Right-click on the printer icon and select [Properties].
3. Click on the [Configuration] tab.
4. Change the settings you wish to set for the printer.
5. Click on [OK].
For further information on Configuring the Print Driver and Installation, refer to the Print Drivers Guide
for Windows CD.

Xerox WorkCentre 5632 Specifications

General

Brand	Xerox
Model	WorkCentre 5632
Category	All in One Printer
Language	English