WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
158
3. The Xerox Access Setup page is displayed. In the Authentication, Authorization and
Personalization area click on the [Edit...] button.
4. In the Authentication method on the machine's touch interface (Touch UI) area select [User
Name/Password Validated Remotely on the Network] from the drop-down menu and click on
the [Save] button to return to the Xerox Access Setup page.
5. In the table displaying a list of related configuration setting pages, click the [Edit...] button on the
Authentication Servers row.
6. In the Authentication Server page, select [Kerberos (Solaris)] from the Authentication Type
drop-down menu, and click on the [Add New] button.
7. In the Server Information area:
a. Enter details in the [Realm] field.
b. Select either [IPv4 Address], [IPv6 Address] or [Host Name] button.
c. If IPv4 or IPv6 Address is selected, enter details in the [IP Address: Port] and [Backup IP
Address: Port] field.
d. If Host Name is selected, enter details in the [Host Name: Port] and [Backup Host Name:
Port] field.
8. In the Optional Information area, if required, you can indicate which LDAP server should be used
to acquire authorization and personalization data when authenticating to the server.
a. Click on the [Add LDAP Mapping] button, the LDAP page displays. To configure LDAP server,
click the [Edit] link or to add a new LDAP server click on the [Add New] button.
b. The LDAP: Server page displays. For details on how to configure this option refer to LDAP on
page 115.
c. When you have configured the feature, click on the [Save] button.
d. Click on the [Add Mapping] button to return to the Add Authentication Server page.
9. Click on the [Add Server] button to save the settings and return to the Authentication Server
page.
10. Click on the [Save] button to return to the Xerox Access Setup page.
11. To set Authentication to control access to individual Services, In the table displaying a list of
related configuration setting pages, click on the [Edit..] button for
Tools and Feature Access
(Lock/Unlock).
a. On the Tools & Feature Access page, in the Presets area, select either [Open Access] to allow
all users access to all pathways and features or [Custom Access] and lock or unlock the
various pathways and features as required.
12. Click [Save] to confirm the changes and return to the Xerox Access Setup page..
13. Select [Logout] in the upper right corner of your screen if you are still logged in as Administrator,
and click on the [Logout] button.
Authentication Configuration for Kerberos (Windows 2000/2003)
Note: To configure this feature or these settings access the Properties tab as a System
Administrator. For details, refer to Access Internet Services as System Administrator on page 24.
1. From the Properties tab, click on the [Security] link.
2. Click on the [Authentication] link and select [Setup] in the directory tree.
To Next Page
Loading...
Need help?
General
