WorkCentreâ„¢ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
281
Automatic Redial Setup
Automatic Radial Setup allows you to specify the time interval before the devices redials after a failed
transmission. It also allows you to specify the number of attempts the device shall make to transmit a
fax, before rejecting the job.
1. From the Fax Transmission Defaults screen, touch the [Automatic Redial Setup] icon.
2. The Automatic Redial Setup screen displays. There are two options:
• Redial Time Interval (in minutes, the range is from 1 to 25).
• Automatic Redial Attempts (the range is from 0 to 14).
3. Use the left and right arrow buttons to select the required amount.
4. Touch [Save] to return to the Fax Transmission Defaults screen.
Automatic Resend
The Automatic Resend automatically resends part or all of a failed fax transmission. You can set the
number of automatic resend attempts.
1. From the Fax Transmission Defaults screen, touch the [Automatic Resend] icon.
2. The Automatic Resend screen displays. For [Number of Resends], use the left and right arrow
buttons to select the required amount. The range is 0 to 5.
3. Select one of the following options for what part of the Fax job to re-send if transmission fails:
• Failed page(s) without a cover page
• Failed page(s) with a cover page
• Whole job without a cover page
• Whole job with a cover page
4. Touch [Save] to return to the Transmission Defaults screen.
Audio Line Monitor
Audio Line Monitor allows you to hear the Fax transmission taking place across the telephone line.
1. From the Fax Transmission Defaults screen, touch the [Audio Line Manager] icon.
2. The Audio Line Manager screen displays. Select [Enable].
3. For Line Monitor Volume, select one of the following:
• High
• Medium
• Low
4. For Line Monitor Duration, use the left and right arrow buttons to select the required time, from 1
to 25 seconds.
5. Touch [Save] to return to the Transmission Defaults screen.
Transmission Header Text
Transmission Header Text feature allows you to specify a text string to be transmitted as part of the
transmission header.
1. From the Fax Transmission Defaults
screen, touch the [Transmission Header Text] icon.
To Next Page
Loading...
Need help?
General
