Xerox WorkCentre 5632 System Administrator Guide

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
344
At the Device:
Note: To configure this feature or these settings access the Tools pathway as a System
Administrator. For details, refer to Access Tools Pathway as a System Administrator on page 18.
1. From the Tools pathway, touch [Network Settings].
2. Touch [USB Printer Port]. The USB Settings screen displays.
a. For USB Connection Mode, touch [Direct Printing via Driver].
b. For Print Timeout (Seconds), set time in seconds using the up and down arrow buttons. The
range is 0 - 60.
c. To disable the Print Timeout set the value to 0.
d. Touch [Save].
3. Press the <Log In/Out> button.
4. Touch [Logout] to exit the Tools pathway.
5. Connect your workstation or laptop to the device with a USB cable.
6. Install Print Driver. For Details, refer to Print Drivers on page 141.

Xerox WorkCentre 5632 Specifications

General

Brand	Xerox
Model	WorkCentre 5632
Category	All in One Printer
Language	English