Installation
Xerox® Smart Card
Installation Guide
16
f. Enter the Smart Card Timeout
required between 1 and 120
minutes.
The default setting is 5 minutes.
g. If the machine is inactive for the
period of time specified, it will
end the session automatically.
Note: When the Smart Card is removed, the user session will timeout.
Xerox WorkCentre 5632/5638/5655/5665/5675/5687, Xerox WorkCentre 5135/5150 and
Xerox WorkCentre 5735/5740/5755/5765/5775/5790 (System Software 06x.130.xxx.xxxxx):
a. Select Security and select Authentication Configuration.
Note: If this is the first time you are entering the authentication wizard, you may be prompted to
enter a new password that is different from the default password.
b. Enter new password and select
Next.
c. Select Next.
d. Select the Device User Interface
Authentication option CAC/PIV
and select Next.
Note: This screen is dependent on the
selection made on the previous
screen.
To Next Page
Loading...
Need help?
General
