Installation
Xerox® Smart Card
Installation Guide
19
If the Domain Controller certificate is
not available, the certificate that was
used to issue the Domain Controller
certificate can be uploaded instead.
The Domain Controller certificate, or
its issuing certificate is needed by the
device to validate the interactions
between the device and the domain
controller.
l. Select Save.
m. Repeat the process to enter the
details for all Domain Controllers.
If an error is made, select the Domain Controller from the list, and make any corrections.
n. Select Edit.
o. Make any changes, then Select Save.
Note: To change the Domain Controller search order, select the controller and use the up and
down arrows on the right side of the screen to promote or demote the controller order.
7. Upload certificates
Note: These steps are Read Only if
using any of the OCSP Certificate
Validation options.
Load the DC root and intermediate
certificates and the OCSP root and
intermediate certificates:
a. Select the Link to Security >
Trusted Certificate Authorities
Page option or select Trusted
Certificate Authorities from the
menu.
b. At the Trusted Certificates
Authorities screen, select Add.
c. Browse to the previously
retrieved certificates and add
them one at a time.
d. Select the certificate then select
the Upload Certificate
Authority button to add each
one.
e. Repeat the process until all
certificates are installed.
f. Select Close.
To Next Page
Loading...
Need help?
General
