Xerox WORKCENTRE 5755 Getting Started Guide

Log In / Out
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Getting Started
32
Log In / Out
If Authentication or Accounting has been enabled on the device, you may need to log in before using
some or all of the services. A picture of a lock on a button indicates that you must log in to use that
service.
1. To log in select the Log In/Out button on the control
panel. Selecting a locked service will also prompt you
to enter a log in name and password.
2. Use the keyboard to enter your User Name.
If a password is required, select the Next button and
use the keyboard to enter your Password.
Select the Enter button.
3. If an accounting system is in use on the device, you
may also need to enter additional information, for example a User ID or Account ID. If a Foreign
Device Interface (FDI) is installed, you are prompted to access via the device installed, for example
a card reader or coin slot.
Your user details display in the User Details area on the right side of the message display.
4. To log out, select the Log In/Out button again or select the User Details area and select Log Out
from the drop-down menu.
5. A confirmation screen is displayed, select Log Out or Cancel.

Xerox WORKCENTRE 5755 Specifications

General

Print Technology	Laser
Print Speed	Up to 55 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	10/100/1000Base-T Ethernet, USB 2.0
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Fax Transmission Speed	33.6 Kbps
Operating System Compatibility	Windows, Mac, Linux
Paper Capacity	Standard: 1, 100 sheets; Maximum: 4, 700 sheets