Device Overview
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Getting Started
11
Device Overview
Control Panel: Touch Screen and Numeric
Keypad.
High Volume Finisher: This optional finisher
collates, offsets, stacks and staples your output.
Booklet Maker, Tri-fold and Hole Punch kits can
be installed with this finisher.
Document Feeder and Document Glass: Used
for scanning single or multiple documents. The
document glass can be used for scanning single,
bound, custom size or damaged documents.
Booklet Maker and Trifolder: These are optional
devices which can be installed with the High
Volume Finisher to staple and fold booklets or
leaflets.
Paper Trays 1 and 2: These trays are standard
on all models. Trays 1 and 2 are fully adjustable
and can be used for media sizes 5.5x8.5” to
11x17”(A5 to A3).
Convenience Stapler: This optional device
provides manual stapling of up to 50 sheets. The
Convenience Shelf must also be fitted.
Paper Trays 3 and 4: These trays are high
capacity paper trays. Trays 3 and 4 are dedicated
trays used for 8.5x11” or A4 size media.
Offset Catch Tray: Delivers output collated or
uncollated. Each set or stack will be offset from
the previous to enable easy separation.
Bypass Tray: Used for non-standard printing
media.
Basic Office Finisher: This optional device
stacks, collates, staples and offsets your output.
Paper Tray 5: This is an optional high capacity
paper tray. It is a dedicated tray used for 8.5x11”
or A4 long edge feed size media. Optional kits
are available to accommodate 11x17”, A3,
8.5x14”, 8.5x11” or A4 Short Edge Feed (SEF)
media.
Office Finisher: This optional device stacks,
collates, staples and offsets your output. Hole
punch kits are also available for this finisher.
Tray 6 (Inserter): An optional paper tray for use
with the High Volume Finisher. It is used to insert
pre-printed sheets into copy sets. It is not part of
the printing process and cannot be used for
imaging.
Document Glass Cover: This is a flat hinged
cover for the document glass. It is fitted instead
of the document feeder and is standard on some
configurations.
13
14
1
2
3
4
5
6
8
7
9
10
To Next Page
Loading...
