Installing and Using the Network Scanner Utility
WorkCentre 7425/7428/7435
System Administrator Guide
139
4. From the File menu, select the command to import the image from the scanner. In Photoshop, for
example, this would be Import/Twain.
5. If the scanner doesn't automatically display on screen allowing its selection with the Select
Scanner button, perform the next six steps. Otherwise go to step 12 below.
6. Click Refresh.
7. Click Options.
8. Click Change Display in the scanner selection box.
9. To display scanners on other sub-networks, register them under Scanner Registration.
10. Click OK.
11. Select the scanner for connection from the displayed list, then click Select Scanner. You can also
double click the displayed scanner's name.
12. Enter the folder number and password when prompted.
13. Click Open Folder.
14. From the displayed document list, select the document you wish to import and click Import.
Importing Scanned Data from the Folder using Network Scanner Utility 3
1. On your Windows desktop, select Start\Programs\FujiXerox\Network Scanner Utility\Network
Scanner Utility 3.
2. Select the scanner for connection from the displayed list, then click Select Scanner.
3. If no items are shown in the list, click Refresh, then Options, then Change Display and register the
scanner’s IP address and name. Click OK when done.
4. Enter the folder number and password when prompted.
5. Click Open Folder.
6. From the displayed document list, select the document you wish to import and click Import.
To Next Page
Loading...
Need help?
General
