CentreWare Internet Services
WorkCentre 7425/7428/7435
System Administrator Guide
27
• Pool Server Settings: Set up the login details from this device to a remote template pool server.
• Cloning: Copy the settings and Web-generated scan templates of one printer and transfer them to
other printers operating with the same version of system software. Groups of settings can be
cloned, depending on the optional features installed on the printer.
• Alert Notification Folder
• Billing Meter Read Alerts: Set up an e-mail notification to the designated Billing Administrator
whenever billing meters are automatically read by the Meter Assistant.
• Supplies Data Sent Alerts: Set the receiving E-mail address for alerts from the Supplies
Assistant.
• Billing & Counters Folder: View the total number of pages, images, or jobs processed by the
printer.
• Smart eSolutions Folder: Set up automatic billing meter reading and supplies reporting. For more
information see Xerox Smart eSolutions on page 189.
Connectivity Folder
• Port Settings: Enable or disable ports. Note that if any selections, such as Port 9100 for example,
are unavailable for setting using the printer's control panel, they can be set here. You can enable or
disable the following ports:
•EtherTalk
• NetWare (for Novell networks)
•SNMP
•SMB
•LPD
• Port 9100
•Send E-mail
• Receive E-mail
• E-mail Notification Service
•Internet Services
•FTP Client
•IPP
• UPnP Discovery
•WebDAV
•Bonjour
•WSD
•SOAP
• Physical Connections Folder
• Ethernet: View or change Ethernet (speed) Settings from a drop down selection list. Selections
include: Auto (auto sensing), (10/100Base-TX), 100Base-TX (Half or Full Duplex), and 10Base-
TX (Half or Full Duplex). The MAC Address of the printer is also displayed, but not editable.
• Parallel: View or change the enablement settings for Bi-Directional Communications (a check
box) and Auto Eject Time (Parallel Port Timeout), with a range of 5 to 1275 seconds.
To Next Page
Loading...
Need help?
General
