Xerox WORKCENTRE 7435 System Administrator Guide

Network Management
WorkCentre 7425/7428/7435
System Administrator Guide
56
8. Enter a Time Out value for jobs being sent to the printer through this Port. This is the length of
time that the Controller will wait for an end of job command before printing the current job.
9. Click the Apply button to accept changes, or the Undo button to return settings to their previous
values.
Note: Setting changes are not applied until you restart the printer.

Xerox WORKCENTRE 7435 Specifications

General

Brand	Xerox
Model	WORKCENTRE 7435
Category	All in One Printer
Language	English