Xerox WorkCentre6655 Software Installation Manual

Xerox WorkCentre6655

4 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

1

WorkCentre 6655

Software Installation Instructions

These instructions use CentreWare Internet Services (CWIS) to upgrade a

machine from a 073.xxx version to a 073.xxx version.

Important

• Unzip all files. A folder called “WorkCentre_6655_2.0-2.0” will be created. See page 3 for

extract instructions.

• Make sure A4 or Letter paper is loaded in at least one tray.

Determine your version

1. Find your device IP address and software version.

a. Press the Machine Status button.

b. On the Machine Information tab, press the Information Pages button.

Other manuals for Xerox WorkCentre6655

User Guide282 pages

System Administrator Guide272 pages

Operation Guide14 pages

Secure Installation And Operation19 pages

Quick Start Guide14 pages

Cartridge Replacement Instructions2 pages

Questions and Answers:

T
tyler17Aug 21, 2025
How to fix Xerox Printer that fails to power on?
- D
  davidlunaAug 21, 2025
  If your Xerox Printer fails to power on, several factors could be at play. First, ensure that both power switches are turned on. Next, check that the power cord is securely plugged into the outlet. Try plugging another electrical appliance into the same outlet to verify it's working correctly, or try a different outlet altogether. Finally, confirm that the power source matches the electrical specifications listed for the printer.
A
allen93Aug 25, 2025
Why is my Xerox Printer printing from the wrong tray?
- D
  Dana JohnsonAug 25, 2025
  If your Xerox printer is printing documents from the wrong tray, the application and print driver may have conflicting tray selections. Check the tray selected in the print driver. Go to the page setup or printer settings of the application from which you are printing. Set the paper source to match the tray selected in the print driver or set the paper source to Automatically Select. To have the print driver select the tray, set the tray used as the paper source to Auto Selection Enabled.
A
Alejandro YangAug 27, 2025
Why is automatic 2-sided printing not working on my Xerox Printer?
- E
  Eric NguyenAug 27, 2025
  If you're experiencing issues with automatic 2-sided printing on your Xerox printer, it could be due to unsupported or incorrect paper. Ensure that you are using a supported paper size and weight for 2-sided printing. Remember that envelopes and labels cannot be used for 2-sided printing. Also, verify that the '2-Sided Print' option is selected in the print driver properties under the Paper/Output tab.
N
Nathan HernandezAug 27, 2025
Why does my Xerox All in One Printer reset or turn off frequently?
- J
  James LopezAug 28, 2025
  Your Xerox All in One Printer might reset or turn off frequently due to: * The power cord not being plugged into the outlet correctly. Turn off the printer, ensure the power cord is correctly plugged into both the printer and the outlet, then turn the printer back on. * A system error. Turn the printer off, then on again. * The printer being connected to an uninterruptible power supply. Turn off the printer and connect the power cord to a suitable outlet. * The printer being connected to a power strip shared with other high-power devices. Plug the printer directly into the outlet or into a power strip not shared with other high-power devices.
P
Peter SmithAug 29, 2025
How to fix automatic 2-sided printing problems on Xerox All in One Printer?
- H
  Heather HughesAug 29, 2025
  To fix automatic 2-sided printing problems on your Xerox All in One Printer: * Ensure that you are using a supported paper size and weight for 2-sided printing. Note that envelopes and labels cannot be used for 2-sided printing. * In the print driver Properties, select 2-Sided Print on the Paper/Output tab.
T
Tiffany LesterAug 31, 2025
Why does my Xerox Printer reset or turn off frequently?
- R
  Ryan WeaverAug 31, 2025
  If your Xerox Printer frequently resets or turns off, the issue might stem from a few causes. Ensure the power cord is correctly plugged into both the printer and the outlet. If a system error occurred, turn the printer off and on again. You can print the Error History from the Information Pages of the Printer Setting Utility. Avoid connecting the printer to an uninterruptible power supply; instead, use a suitable outlet. Also, make sure the printer isn't sharing a power strip with other high-power devices; plug it directly into the outlet or a dedicated power strip.
E
Erik AlexanderSep 1, 2025
Why is my Xerox Printer making unusual noises?
- J
  jimmykirkSep 1, 2025
  If your Xerox Printer is making unusual noises, there may be an obstruction or debris inside the printer. Turn off the printer and remove any obstructions or debris that you can access.
J
Jason TorresSep 3, 2025
What to do if paper tray fails to close on Xerox Printer?
- R
  Rebecca WelchSep 3, 2025
  If the paper tray on your Xerox Printer fails to close, it may be due to a few reasons. Check that the paper tray lift plate is locked down by pushing down on the paper stack at the back of the tray until it locks. If the tray is extended for legal size paper, it will protrude when inserted into the printer. Also, ensure that no debris or objects are blocking the tray. Finally, adjust the paper guides in the tray to match the size of the paper.
K
Keith JohnsonSep 4, 2025
Why has condensation formed inside my Xerox Printer?
- R
  Rita BallSep 4, 2025
  If condensation has formed inside your Xerox Printer, it's likely because the printer has been sitting in a cold room or the relative humidity of the room is too high. Allow the printer to acclimate for several hours before operation and ensure it operates at room temperature. Also, reduce the humidity in the room or move the printer to a location where the temperature and relative humidity are within the operating specifications.
M
Michael SmithSep 6, 2025
What to do if my Xerox All in One Printer won't turn on, and I suspect the outlet?
- S
  Shawn HendersonSep 6, 2025
  If your Xerox All in One Printer isn't powering on, and you think the outlet might be the issue: • Plug another electrical appliance into the same outlet to see if it works. • Try plugging the printer into a different outlet.

Xerox WorkCentre6655 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Resolution	300 x 300 dpi
Fax Speed	33.6 kbps
Duplex Printing	Automatic
Display	7-inch color touchscreen
Operating System Compatibility	Windows, macOS, Linux
Connectivity	USB, Ethernet, Wi-Fi
Mobile Printing	Apple AirPrint, Xerox Mobile Print
Weight	28.6 kg

Related product manuals

Preview: Xerox WORKCENTRE 7120

Xerox WORKCENTRE 7120

Preview: Xerox WorkCentre 7225

Xerox WorkCentre 7225

Xerox WorkCentre 7556

Xerox WorkCentre 7535

Preview: Xerox WorkCentre 3550

Xerox WorkCentre 3550

Preview: Xerox WorkCentre 7220

Xerox WorkCentre 7220

Preview: Xerox WorkCentre 7525

Xerox WorkCentre 7525

Preview: Xerox WorkCentre 5335

Xerox WorkCentre 5335

Preview: Xerox WorkCentre 6505

Xerox WorkCentre 6505

Preview: Xerox WorkCentre 5325

Xerox WorkCentre 5325

Preview: Xerox WorkCentre 3119

Xerox WorkCentre 3119

Preview: Xerox WorkCentre 7545

Xerox WorkCentre 7545