Xerox XTRAVEL-SCAN - Travel Scanner 100 User Manual

Xerox Travel Scanner 100 User’s Guide 27
Scanning
The Page Settings tab
Click the Page Settings tab to select options applicable to how you want the image to appear after
scanning.
Size—Click Standard, click the menu arrow and choose a page size from the list, or click Custom and enter
the horizontal and vertical page dimensions in the boxes. The maximum size is 8.5" x 14". The units of
measurement can be inches or millimeters. Click the name of the units, inches or millimeters, to toggle
between them.
Improvements and Settings—Only the options that apply to the selected scanning mode on the Scan
Settings tab are available.
• AutoCrop to Original—Select this option to let the scanner automatically determine the size of the
item being scanned.
• Reduce Moiré Patterns—Moiré patterns are wavy, rippled lines that sometimes appear on the
scanned images of photographs or illustrations, particularly newspaper and magazine illustrations.
Selecting Reduce Moiré Patterns will limit or eliminate moiré patterns in the scanned image. This
option is only available at lower resolutions.
• Straighten Image—Select this option to let the scanner automatically determine if a page is skewed,
and then straighten its image. The scanner detects page edges and can sense when the page is fed
through at an angle. However, if the page is fed through at too great an angle, the image may not
straighten fully. In that case, re-scan the page.
• Invert Image—Only available for Black&White Mode, this option reverses the black and whites of an
image.
Click the name to
toggle between inches
and millimeters.
Original Image Inverted Image

Xerox XTRAVEL-SCAN - Travel Scanner 100 Specifications

General

Brand	Xerox
Model	XTRAVEL-SCAN - Travel Scanner 100
Category	Scanner
Language	English