Xerox XTRAVEL-SCAN - Travel Scanner 100 User Manual

Scanning
28 Xerox Travel Scanner 100 User’s Guide
• Color Filter—Color filter is the ability of your scanner to automatically remove a color from a scanned
image. For example, if you are scanning a letter with a red watermark, you can choose to filter out the
red so the scanned letter just shows the text and not the red watermark. Color filter applies to Black &
White or GrayScale scanning modes.
If you are finished making changes to the configuration, click on OK to save the settings and close the
window.
The Advanced Settings tab
1. Click the Advanced Settings tab.
The options of the Advanced Settings tab are for the Color or Grayscale scanning mode.
2. Drag the sliders to the left and right to change the color settings. As you do, the image changes to
show the effects of the new settings.
Saturation—the strength or purity of a color.
Hue—the color your eyes see as reflected from the image
Gamma—controls the brightness of the midtones of the color.
3. Click OK to save the new configuration.
It will now be in the list of Scan Configurations on the One Touch Properties window for the appropriate
Destination Applications.
The original with a red
watermark over black text.
The scanned item with the
red filtered out.

Xerox XTRAVEL-SCAN - Travel Scanner 100 Specifications

General

Brand	Xerox
Model	XTRAVEL-SCAN - Travel Scanner 100
Category	Scanner
Language	English