XHDATA D-808 - Setting the clock

10
presses of the buon do not toggle the opon. Long press the key to change it.
Temperature
The temperature scale for display, Fahrenheit or Cengrade, may be selected. With
the radio o, press the DISPLAY buon unl the temperature is displayed, then long
-press the number 3 to change the seng. Repeatedly press the buon to toggle
between F and C.
Seng the clock
The radio clock only supports 24-hour me display only.
To set the clock, turn the radio o and long press TIME SET. The radio will display
“TIME.” Key in the 4-digit me to set. To set the seconds, wait unl about 7 seconds
before the 00 minute, then acvate the me funcon, quickly key in the me and
then press TIME again. Note that me seng mode automacally exits aer about
4 seconds with no key pressed.
The radio has the opon to automacally set the me from an FM broadcast staon
the provides it (refer to the RDS topic for more on this). To enable automac seng,
press the TIME SET buon with the radio o. Use the up arrow key to toggle be-
tween Auto and Manual modes. Note: many FM staons to not broadcast me, and
those that do may not be accurate. You must tune the staon with that informaon
for the me to be set.
Lock
With the radio on or o, long press the INFO buon to disable the keys on the radio.
Long press again to re-enable them. This feature is useful to prevent the radio from
being turned on accidentally during handling or when packed.
Display light
The display is automacally illuminated for about 10 seconds when you press a key
or turn the tuning knob. Pressing the LIGHT buon turns it on indenitely. When
set, the light stays on even when the radio is turned o.