To Next PageTo Next Page
Need help?Do you have a question about the Xiaomi roborock and is the answer not in the manual?
General| Brand | Xiaomi |
|---|---|
| Model | roborock |
| Category | Vacuum Cleaner |
| Language | English |
Identifies key buttons and indicators on the main unit of the vacuum cleaner.
Instructions for partial cleaning, starting, stopping, and turning the device on/off.
Explains the ring indicator colors, Wi-Fi indicator, and charging process.
How to reset Wi-Fi settings by pressing buttons.
Lists and describes the water reservoir, wet cleaning module, dock-station, and power cable.
Identifies various sensors and external components on the robot.
Instructions for correctly positioning and connecting the docking station.
Specifies the required clearance around the docking station for optimal operation.
Instructions for powering on the device and initiating the charging process.
Explains the meaning of the annular indicator for charge and the Wi-Fi indicator for connection status.
Step-by-step guide for installing and preparing the wet cleaning module.
Instructions for initiating, pausing, and stopping the cleaning cycle.
How to remove and manage the wet cleaning module.
Procedures for turning the device on/off and handling charging.
Describes the robot's cleaning strategy and automatic return to the dock.
Instructions for activating partial cleaning and pausing/resuming the robot.
Information on sleep mode, scheduling, and resetting Wi-Fi.
How to define specific zones for cleaning or set a destination endpoint.
Guide to downloading the Mi Smart Home app and adding the device.
Explains how to choose between quiet, normal, strong, and maximum cleaning modes.
Details on enabling/disabling and configuring the DND mode.
Instructions on using tape to create virtual barriers for the robot.
Step-by-step guide for cleaning the main brush and its components.
Guide to cleaning the dust collector and filter.
Detailed steps for cleaning the filter, including drying requirements.
Instructions for cleaning and maintaining the side brush.
Recommendations for battery maintenance and optimal lifespan.
How to rinse and maintain the wet cleaning attachment for optimal performance.
Instructions for cleaning and reinstalling the wheel.
Guide for replacing worn-out filter components.
Instructions for cleaning all types of sensors on the vacuum cleaner.
How to clean the recharging contact areas of the dock station.
Steps for updating the vacuum cleaner's firmware using the mobile app.
Guide for resetting the device and restoring factory settings.
Explains how the ring indicator and voice messages signal malfunctions.
Provides troubleshooting steps for errors related to sensors, movement, and brushes.
Provides troubleshooting steps for errors related to filters, charging, and battery temperature.
Solutions for errors related to laser rangefinder, charging contacts, and docking station signal.
Addresses issues like device not turning on, charging, and returning to the dock.
Answers common questions regarding cleaning completion, DND mode, and self-return.
Addresses questions about cleaning completion, self-return, and usage restrictions.
Critical safety advice for battery handling, charging, and laser compliance.
