Xilinx Virtex-7 FPGA VC7203 Characterization Kit IBERT - Launching the Vivado Design Suite Software

14 www.xilinx.com VC7203 IBERT Getting Started Guide
UG847 (v4.0) November 6, 2013
Chapter 1: VC7203 IBERT Getting Started Guide
Launching the Vivado Design Suite Software
1. Start Vivado Design Suite on the host computer and click Flow > Open Hardware
Manager (highlighted in Figure 1-10).
GTX Quad 119 OFF OFF ON
USB/UART OFF OFF OFF
Table 1-1: SD Card Contents and Configuration Addresses (Cont’d)
Demonstration
Design
ADR2 ADR1 ADR0
X-Ref Target - Figure 1-10
Figure 1-10: Vivado Design Suite, Open Hardware Manager
8*BFBB
Send Feedback