Xilinx Virtex-7 FPGA VC7203 Characterization Kit IBERT - Page 15

VC7203 IBERT Getting Started Guide www.xilinx.com 15
UG847 (v4.0) November 6, 2013
Running the GTX IBERT Demonstration
2. In the Hardware Manager window, click Open a new hardware target (highlighted in
Figure 1-11).
3. An Open Hardware Target wizard pops up. Click Next on the first window.
4. In the Vivado CSE Server Name window, make sure localhost:60001 is entered for
the Server name. Click Next and it opens the server to connect to the Xilinx TCF agent.
X-Ref Target - Figure 1-11
Figure 1-11: Open a New Hardware Target
8*BFBB
Send Feedback