Xilinx Virtex-7 FPGA VC7203 Characterization Kit IBERT - Page 17

VC7203 IBERT Getting Started Guide www.xilinx.com 17
UG847 (v4.0) November 6, 2013
Running the GTX IBERT Demonstration
To start the SuperClock-2 module:
1. The Hardware window shows the System ACE and the XC7VX485T device and
reports that it is programmed. Select XC7VX485T_1. In the Hardware Device
Properties window, enter the file path to the Probes file associated with the Q115
IBERT design (vc7203_q115.ltx) (Figure 1-13).
X-Ref Target - Figure 1-13
Figure 1-13: Adding the Probes File
8*BFBB
Send Feedback