VC7203 IBERT Getting Started Guide www.xilinx.com 21
UG847 (v3.0) July 10, 2013
Running the GTX IBERT Demonstration
6. A Create Links window pops up. In this window you can link any TX to RX GTs. To
create links, select the TX GT and RX GT from the two lists, then press the Add (+)
button. For this project, connect the following links:
MGT_X1Y8/TX to MGT_X1Y8/RX
MGT_X1Y9/TX to MGT_X1Y9/RX
MGT_X1Y10/TX to MGT_X1Y10/RX
MGT_X1Y11/TX to MGT_X1Y11/RX
This is shown in Figure 1-18.
X-Ref Target - Figure 1-17
Figure 1-17: Serial I/O Analyzer - Create Links...
To Next Page
Loading...
