Xilinx ZC702 Getting Started Guide

ZC702 and ZVIK Getting Started Guide www.xilinx.com 25
UG926 (v3.0.1) February 12, 2013
Run the BIST Application
If any of the BIST tests fail, check the settings of the switches and jumpers as shown in
Figure 1-4, Table 1 - 1, and Table 1-2 . If these settings are correct and the test still fails,
please contact Xilinx Support at www.xilinx.com/support
and open a WebCase.

Xilinx ZC702 Specifications

General

Brand	Xilinx
Model	ZC702
Category	Motherboard
Language	English