Xilinx ZCU102 Tutorial

Setting Clock Boot Frequencies
˃ Note: The Set Boot Frequency settings will override the Restore Device
Defaults at Bootup
˃ The example designs, IBERT, IPI, MIG, etc., expect Si570 User set to 300
MHz, and Si570 MGT/Si5328 set to 156.25 MHz
Note: Presentation applies to the ZCU102

Xilinx ZCU102 Specifications

General

Processor	Quad-core ARM Cortex-A53, Dual-core ARM Cortex-R5
SD Card	MicroSD card slot
Video Outputs	DisplayPort
FPGA	Xilinx Zynq UltraScale+ XCZU9EG-2FFVB1156E
Memory	4GB DDR4 Component Memory
Storage	MicroSD card slot
Ethernet	Gigabit Ethernet
USB	1 x USB 3.0, 1 x USB 2.0
PCIe	PCIe Gen2 x4
Display	DisplayPort
Power Supply	12V DC input
SATA	SATA 3.0
Clocking	Programmable clocks
Operating System Support	PetaLinux