Xilinx Zynq-7000 Application Note

Hardware and Software Requirements
XAPP1309 (v1.0) March 7, 2017 4
www.xilinx.com
Hardware and Software Requirements
The hardware and software requirements for the reference system include the following:
• Avnet Industrial Internet of Things (IIoT) starter kit with MicroZed board
• Infineon OPTIGA TPM 1.2 SLB 9670 peripheral module (Pmod) compatible board
• Two USB type-A to USB mini-B cables (for UART and JTAG communication)
• Micro Secure Digital (microSD) memory card (16 GB)
•Ethernet cable
• Xilinx Software Development Kit 2017.1
• Xilinx Vivado® Design Suite 2017.1 (optional)
• Wind River Pulsar Linux 8.0
• VirtualBox 5.0.26 or higher (or VMware equivalent)
• Ubuntu or Ubuntu command line virtual machine image in Open Virtual Appliance format
• strongSwan TNC software
• Tera Term or equivalent communication terminal software
Depending on the system setup, all of the software listed above might not be necessary.

Xilinx Zynq-7000 Specifications

General

Brand	Xilinx
Model	Zynq-7000
Category	Motherboard
Language	English