NetDisk User Manual Network Direct Attached Storage / NDAS
—————————————————————————————————————————————
Enable the unbound NetDisk by selecting either Enable Read/Write or Enable Read Only. •
- NetDisk cannot be used until it is enabled.
- Repeat this step for the second unbound NetDisk.
• Right click My Computer. Click Management > Disk Management.
- If an unbound NetDisk is not yet initialized, indicated by
, go to the Initialize NetDisk
Section. Otherwise go to Partition NetDisk section.
www.XIMETA.de
—————————————————————————————————————————————
36
To Next Page
Loading...
