Ximeta NetDisk - Changing FAT32 File System Format to NTFS File System Format; Format FAT32 to NTFS

NetDisk User Manual Network Direct Attached Storage / NDAS
—————————————————————————————————————————————
Changing FAT32 File System Format to NTFS File System Format
• Please follow below instructions to change File System Format from FAT32 to NTFS
- Right click My Computer.
- Select Manage.
- Double click Disk Management.
- Find NetDisk from the button window and right click on it.
- Select Delete Partition.
- Delete primary partition window may appear. Click Yes.
- Delete all the partitions.
- Once all of the partitions are deleted, right click unallocated NetDisk and select New Partition.
- Welcome to the New Partition Wizard will appear. Click Next.
- Select Primary Partition. Click Next.
- Use the given Partition size in MB. Click Next.
- For drive letter, use assigned drive letter or select a new drive letter. Click Next.
- Select Format this partition with the following settings.
- Select NTFS for File system
- Select Default for Allocation unit size.
- Volume label is optional.
- Check Perform a quick format. Click Next.
- Completing the New Partition Wizard will appear. Click Finish.
www.XIMETA.de
—————————————————————————————————————————————
45