Xinje DP3F Series - Encoder Signal Input Terminal; Motor and Power Supply Interface; Strong Current Interface Function

11
3-4. Encoder signal input terminal
Pin
Name
NC
Reserved
NC
Reserved
NC
Reserved
NC
Reserved
VCC
5V power output, provided by driver, only used for encoder power
supply
GND
EZ+
Encoder Z phase signal +
EZ-
Encoder Z phase signal -
EB+
Encoder B phase signal +
EB-
Encoder B phase signal -
EA+
Encoder A phase signal +
EA-
Encoder A phase signal -
3-5. Motor and power supply interface
3-5-1. Strong current interface function
Interface
Function
Explanation
A+, A-
Motor phase A coil
Cannot change direction by exchanging A+, A-
B+, B-
Motor phase B coil
Cannot change direction by exchanging B+, B-
GND
DC power supply
ground
DC power supply ground
＋V
DC power supply
positive pole
Select the voltage according to the demand
Note:
DP3F-305 range is 20~50VDC: recommended value is 24~36VDC.
DP3F-705 range is 20~50VDC: recommended value of 57 motor is 24 ~ 36VDC, recommended value of 86