1-5. Safety precautions
(1) The drive must be installed and operated by professional technicians!
(2) The input voltage of the driver must meet the technical requirements!
(3) It is strictly forbidden to plug the strong current terminal of the driver when the power is on. When the motor
stops, there is still a large current flowing through the coil. Plug the strong current terminal will produce a huge
instantaneous induced electromotive force, which will burn the driver!
(4) Before power on, please ensure the correctness and firmness of power cable, motor cable and signal cable
connection!
(5) Avoid electromagnetic interference!
To Next Page
Loading...