The following table is the recommended specifications of external regenerative resistance for each type
of motor.
(Not less than this value)
External regenerative
resistance
(Recommended
resistance value)
External regenerative
resistance
(Recommended power
values)
Note:
(1) The smaller the resistance is, the faster the discharge will be, but the smaller the resistance is, the
easier the breakdown resistance will be. Therefore, please close to the the lower limit but not be less
than the lower limit when choosing the type.
(2) When wiring, please use high-temperature flame-retardant wire, and the regenerative resistance
surface can not contact with the wire.
To Next Page
Loading...
Need help?
General
