173
<32 bits operation>
ESUB D10 D20 D50
S1· S2· D·
X0
<64 bits operation>
The binary floating value S1 subtract S2, the result is stored in the target address.
If a constant K or H used as source data, the value is converted to floating point before the
subtraction operation.
<32 bits operation>
<64 bits operation>
The source data and result address can be the same. Please note that when X0 is ON, the
instruction will be executed in every scanning period.
Note: the operand value must be floating numbers, otherwise the result will be error.
(D11,D10) － (D21,D20) → (D51,D50)
Binary Floating Binary Floating Binary Floating
(K1234)
－
(D101, D100) → (D111, D110)
Binary converts to Floating Binary Floating Binary Floating
(D13, D12,D11, D10)－(D23,D22,D21,D20) →(D53, D52,D51, D50)
Binary Floating Binary Floating Binary Floating
(D13, D12,D11, D10)－(D23,D22,D21,D20) →(D53, D52,D51, D50)
Binary converts to Floating Binary Floating Binary
Floating
tudonghoatoancau.com
To Next Page
Loading...
