Xinje XL Series - Page 376

375
Scanning period 1
Scanning period 2
Scanning period 3
Condition M0
Scanning period 4
Scanning period 5
Condition M2
Condition M3
PLS Y0
PLS Y0
When M0 is OFF→ON, run ‘PLSR HD0 HD100 K1 Y0’ in the BLOCK to output the pulse;
When M2 is OFF→ON, the BLOCK stops running, the pulse output stops at once;
When M3 is OFF→ON, output the rest pulses.
SBSTOP(K1 K0)+SBGOON(K1 K1)
tudonghoatoancau.com