449
HSC2 single phase counting
edge configuration
0: rising edge count,
1: Falling edge count,
2: Both rising and falling edges are counted
HSC4 single phase counting
edge configuration
0: rising edge count,
1: Falling edge count,
2: Both rising and falling edges are counted
HSC6 single phase counting
edge configuration
0: rising edge count,
1: Falling edge count,
2: Both rising and falling edges are counted
2：2 times frequency;
4: 4 times frequency(effective at AB phase
counting mode)
Bit selection of HSC
absolute and relative(24
segment)
bit0 corresponds to HSC0，bit1corresponds to
HSC2
，
and so on, bit9 corresponds to HSC18
0
：
relative
1：absolute
Interrupt circulating of 24
segments high speed
counting
bit0 corresponds to HSC0，bit1corresponds to
HSC2
，
and so on, bit9 corresponds to HSC18
0
：
single
1：loop
bit0 corresponds to HSC0
，
bit1corresponds to
HSC2，and so on, bit9 corresponds to HSC18
0：do not support CAM function
1
：
support CAM function
Expansion Module Configuration
Extension module configuration
status(#1#2)
Configuration Status of Extension
Modules 1 and 2
Extension module configuration
status(#3#4)
Configuration Status of Extension
Modules 3 and 4
Extension module configuration
status(#15#16)
Configuration Status of Extension
Modules 15 and 16
BD module configuration status(#1#2)
Configuration Status of BD Modules
1 and 2
ED module configuration status(#1)
Configuration Status of ED Module 1
Extension module configuration
Configuration of Extension Module 1
tudonghoatoancau.com
To Next Page
Loading...
