Xinje XL Series - Page 78

77
If carry on coil’s dual output (dual coil) in the sequencial control program, then the last action
is prior.
Dual output (dual coil) doesn’t go against the input rule. But as the preceding action is very
complicate, please modify the program as in the following example.
Y0
Y0
X0 X2
X3 X4
Y0
X0 X2
X3 X4
M0
M1
X0 X2
X3 X4
Y0
M0
M1
There are other methods. E.g. jump instructions or flow instructions.
tudonghoatoancau.com