XPENG G3i 2022 - Steering Wheel Adjustment and Assist

34
2. Pre-Use Preparation (Interior Equipment)
Steering Wheel
Steering Wheel Position Adjustment
The steering wheel handle is in the locked position by factory
default.
1. When the vehicle is stationary, pull the steering wheel
handle downward to unlock the steering wheel.
2. Move the steering wheel up and down to the proper
position.
3. Pull the steering wheel handle upward to lock the
steering wheel.
Steering Wheel Assist
─
Enter the steering wheel assist mode selection interface
through CID
" →
Driving
→
Steering Wheel Boost
"
,
and tap to select the corresponding mode:
●
SOFT: Reduce the force required to turn the steering
wheel, which is suitable for driving in cities.
●
STANDARD: Respond and react to situations most
effectively.
●
SPORT: Increase the force required to turn the
steering wheel, to increase responsiveness of driving
at higher speed.
Warning
●
It is forbidden to adjust the steering wheel or set up
the steering wheel boost mode while driving.