4. Safe Driving
96
AutoHold
When you need to park your vehicle temporarily, press the
brake pedal deeply after the vehicle stops, and the
indicator light on the dashboard will light up. At this time,
you do not need to continue pressing the brake pedal as the
AutoHold will automatically apply the braking to keep the
vehicle stopped. When you press the accelerator pedal and
start driving, the AutoHold will automatically disable the
braking.
─
After the vehicle is READY, tap "
→
XPILOT
→
AutoHold" on the CID to turn on/off this function.
Note
●
To trigger the AutoHold, the driver door must be
closed, the seat belt is fastened and gear is in D, R or N.
Warning
●
The AutoHold cannot exceed the laws of kinematics,
so please enable the parking brake according to the
road conditions.
To Next Page
