4. Safe Driving
86
Seat Belts with Collision Warning
Seat belts have the following functions:
1. Gap elimination: When the vehicle is ready and the driver
has fastened the seat belt, the seat belt will automatically
retract, eliminate the gap between the driver and seat
belt strap for the optimum comfort.
2. Auto retraction: When the driver unbuckles the seat belt,
the seat belt will retract smoothly until it is fully retrieved.
3. Level 2 collision pre-warning: When the seat belt receives
a FCM warning signal during driving, the seat belt will
vibrate to alert the driver.
4. Level 3 collision pre-tensioning: When the seat belt
receives a FCM collision pre-tensioning signal during
driving, the electric seat belt will retract automatically,
restrain the driver on the seatback and reduce the risk of
injury or death.
Turning On/Off the Driver's Seat Belt
Vibration Warning
─
Tap "
→
Vehicle Settings
→
Safety Belt Vibration
Warning" on the CID to turn on/off this function. After this
function is turned off, the seat belt gap elimination and
auto retraction functions still work.
Warning
●
Do not modify or repair the seat belt by yourself,
please have it inspected or repaired in your local
service center.
●
After a collision or similar situation, the seat belts
shall be promptly replaced after being subjected to
a strong impact. Replacement is also a must if a seat
belt has any sign of wear or damage.
●
Although seat belts can alert you of a hazard, or
avoid or mitigate injury to you in the event of danger,
you still need to drive carefully to avoid the hazard.
To Next Page
