1
2
3
4
5
6
7
8
9
10
11
39
2. Pre-Use Preparation (Interior Equipment)
Caution
●
The wireless charging function is only available for
"
Qi
"
certified phones, and may cause accidents if
using non-certified products.
●
Only one phone can be charged wirelessly at a time,
with the maximum charging power of 15W.
●
On bumpy roads, this function may works
intermittently. If the phone charging stops due to
deviation from the induction area, you need to move
the phone back to the induction area.
●
This function is achieved through the wireless
connection between vehicle and mobile phone.
Therefore, charging may fail in case of either vehicle
or phone fault.
●
The phone may stop charging due to overheating,
please wait until it cools down to continue charging.
●
The wireless charging function will pause for about
2-3s during vehicle starting or when the vehicle
each
40km/h for the first time, the charging will become
normal after the authentication between vehicle and
key is completed.
Warning
●
The wireless charging function has a heating effect
on metal. Please check your phone back and the
induction area for metallic foreign bodies before
charging, otherwise it may cause damage to the
metallic foreign bodies due to heating, and even
cause a safety accident. Metallic foreign bodies in this
context refer to other objects with metallic content,
including but not limited to chips and magnetic stripe
cards.
●
Do not spill water in the front storage box, or it
may enter the wireless charging module and cause
damage to the electronic components.
●
The external wireless charging coil may cause
accidents. Please use it with caution.
●
Please do not leave your cell phone charging in the
vehicle when the driver is not in the vehicle, or it may
cause safety hazards.
●
Please do not place heavy objects on the induction
area, or it may damage the wireless charging module.
●
If the charging function does not work properly, stop
using it and contact your local authorized service
center for troubleshooting.
To Next Page
