Xray XB8E User Manual

25
903412
SFH M4x12
4x
6. FRONT & REAR ASSEMBLY
4x12mm
351203 COMPOSITE FRONT BUMPER FOR SEMI-SPLIT BULKHEAD
353082 COMPOSITE REAR BRACE - MEDIUM - M
353580 COMPOSITE WING HOLDER BRACE WITH REAR BODY POST
902308 HEX SCREW SH M3x8 (10)
902335 HEX SCREW SH M3x35 (10)
BAG
960040
353580
902335
960030
902340
353082
960030
903412
902308
903412
351119
903412
351203
902340 HEX SCREW SH M3x40 (10)
903412 HEX SCREW SFH M4x12 (10)
960030 NUT M3 (10)
960040 NUT M4 (10)
351119 XB8E ALU CHASSIS - SWISS 7075 T6 (3MM) - SHORT
Locations for weights
During initial assembly, there is no need to check gear mesh or diff play. Fitment should not be checked until suspension holders are
installed on the bulkheads and the complete assembly is mounted to the chassis. All parts have specifically designed tolerances for proper
operation once fully assembled. After assembly, check for free rotation of all drivetrain parts and non-binding movement of the suspension.
903308
SFH M3x8
#293084
PRECISION BALANCING CHASSIS WEIGHTS 10G (4)
902312
#353280
GRAPHITE BRACES FOR REAR COMPOSITE BRACE - SET
960030
353280
353280
#351117
XB8E ALU CHASSIS - SWISS 7075 T6 (3mm)
#355627
REAR CENTRAL CVD DRIVE SHAFT 115mm
(LONGER +4mm)
(115mm)
+
#355415 CENTRAL DOGBONE SHAFT UNIVERSAL JOINT +
#355632 REAR CENTRAL DOGBONE DRIVE SHAFT 116mm
LONGER CONFIGURATION

Xray XB8E Specifications

General

Chassis	7075 T6 Aluminum
Drivetrain	4WD
Shock Type	Big Bore
Motor	Not included
Battery	Not included