OWNER’S INSTALLATION LOG
Upon installation of your mobile audio sound system, your Authorized
Xtant Select Dealer will complete this log. Keep this owner’s manual
with your vehicle as a reference for all amplifier settings.
owner’s name:
Vehicle: year:
xtant amplifier serial no.
input sensitivity
(circle setting)
Front Inputs (2 channels) Rear Inputs (mono channel)
–20 dB –10 dB 0 dB +10 dB +20 dB –20 dB –10 dB 0 dB +10 dB +20 dB
Front Crossover (2 channels) Rear crossover (mono channel)
circle jumper setting: circle jumper setting:
Amplifier: Amplifier:
all high low all high low
rca outputs rca outputs
all high low all high low
frequency value (2 channels) frequency value (mono channel)
SIP High Pass FQ SIP High Pass FQ
sip low pass FQ sip low pass FQ
output Level adjustment noise gate adjustment
switch:
on off
threshold position
(draw arrow position)
Accessory modules (circle setting) (draw arrow position)
CM 24X front rear pqm-1 (FRONT) yes no
yes no yes no pqm-1 chip frequency
BLM-1
front rear pqm-1 (REAR) yes no
yes no yes no pqm-1 chip frequency
Xtant Select Dealer
date installed: phone:
installation specialist:
To Previous Page
Loading...
Need help?
General
